How to install OpenVox G400P with Elastix-1.6

[i=s] 本帖最后由 james.zhu 于 2010-5-27 16:04 编辑 [/i]

[align=center][b]How to install OpenVox G400P with Elastix-1.6[/b][/align][align=center][b]Written by: [email=james.zhu@openvox.cn]james.zhu@openvox.cn[/email][/b][/align][align=center][b]Date: 27/05/2010[/b][/align]
Elastix is a very powerful platform to run asterisk and some Apps.Naively, G400P does not run under Elastix. To makeG400P and Elastix work together, Users have to do some extra steps. There are few steps to go through:
1)
Make sure Elastix has been installed
2)
Install G400P, please refer ourwiki or user manual to compile G400P, please check from:
[url=http://wiki.openvox.cn/index.php/OpenVox_G400P_User_Manual]http://wiki.openvox.cn/index.php/OpenVox_G400P_User_Manual[/url]
In elastix-1.6.2,users do not need to install any extra packages, just unzip the tar file to/usr/src
2.1) run the script under the zipped the file: ./install.sh
This script will download and install the asterisk,zaptel, libpri… .
2.2) press ENTER key to let the system go through.
2.3) change to zaptel directory, run: [b][color=red]make config[/color][/b] to add zaptel and opvxg4xx in system
Service.
2.4) edit the etc/sysconfig/zaptel, add [b][color=red]MODULES=”$MODULES opvxg4xx”[/color][/b] to the file and remove unused the modules.
2.5) add dahdi in blacklist to prevention the system starting dahdi.

2.6) edit the file Zapata.conf under /etc/asterisk, [b][color=red]change the context = from-gsm to[/color][/b]
[b][color=red]context = from-pstn
[/color][/b]
Note: Do not run: [b][color=red]make samples[/color][/b]under asterisk source directory.
3)
Configure the elastix outbound and inbound routing:
3.1) go to trunks under the Zap Identifier (trunk name), [b][color=red]add 1 to link to channel to zap/1[/color][/b]

The system will go through from zap/1, which is sim card 1
3.2) set inbound call forward to SIP.

[size=14pt]Testenvironment[/size][size=14pt]:[/size]
[b][color=red]OpenVox G400P[/color][/b]
[b][color=red]Elastix-1.6.2[/color][/b]
[b][color=red]opvx-bristuff-0.4.0-RC3h.tar.gz[/color][/b]
[color=red]Please take a note: since the default asterisk and dahdi under elastix-1.6 have been overwritten by asterisk and zaptel,some features might not work properly due to the recompilation. Please consider the risk![/color]

主题测试文章,只做测试使用。发布者:zhangyang,转转请注明出处:https://www.voip88.com/how-to-install-openvox-g400p-with-elastix-1-6/

(0)
打赏 微信扫一扫 微信扫一扫 支付宝扫一扫 支付宝扫一扫
上一篇 2022年 8月 26日 下午3:24
下一篇 2022年 8月 26日 下午3:24

相关推荐

  • -1

    0

    文档 2022年 8月 26日
    2000
  • 关于指定呼出路由的问题。

    有三个呼出路由是A ,B ,C,分别是按1,2,3的前缀呼出,现在话机按1再拨电话会从A走,按2–B走,按3–C走。但分机需要先拨一个数字,这样感觉不太好我想让他自动的加一个数字,分机 801正常拨号走A,802正常拨号走B,803正常拨号走C.需要怎么设置?

    文档 2022年 8月 26日
    1200
  • 你们新版本汉化失真的几处地方

    findmefollow中install284和288

    文档 2022年 8月 26日
    1200
  • astDB的修复步骤

    在试验环境或者操作不当导致asterisk意外退出时,有机会发生astdb崩溃(Corrupted),下面步骤可以回复不当的astdb1. amportal stop(停止AMP的所有相关服务,包括asterisk) 2.将原有的astdb改名cd /var/lib/asterisk mv astdb astdb.old 3.amportal start 4…

    文档 2022年 8月 26日
    1000
  • 减肥者

    来自:[url]http://www.newyorker.com/humor/issuecartoons/2009/10/26/cartoons_20091019?slide=5#showHeader[/url]

    文档 2022年 8月 26日
    1100

发表回复

您的电子邮箱地址不会被公开。 必填项已用*标注

联系我们

400-800-8888

在线咨询: QQ交谈

邮件:admin@example.com

工作时间:周一至周五,9:30-18:30,节假日休息

关注微信
自6.2开始主题新增页头通知功能,购买用户可免费升级到最新版体验